Printable Prints

Printable Prints - If we create a new print from one of the older prints we keep the stk on the print to make the prints consistent. This stk label was on some older prints that we have. Here is another look at the problem: You would have to know the function and fit requirements for the part in question to determine critical print dimensions. Thus it covers all, including paint. I have been designing for over 30 years in the communications and aerospace industries. The old copy machines, blue prints and sepia. Yellow highlighter used for delete. Acad 2006 thanks paul ostand www.ostand.com I find that the border of the viewport in paper space, will plot unless it is expanded to outside of the paper itself.

It's The Dimensioning And Tolerance Scheme That Have To Explicitly Define Symmetry Or The Equivalent (Note I Say Equivalent Because To Us Standards The Application Of Symmetry Gd&T Is A Bit Limited But The Same Effect Can Be Achieved In Other Ways.)

Critical dimensions are subjective, based upon the function of the particular component being inspected. If we create a new print from one of the older prints we keep the stk on the print to make the prints consistent. It was a different example of stk being used than what was in kenat's description. Everything i do goes behind, and none of the bring to front / send to back commands i can find seem to help.

The Color Coding Of Drawings Has Been Designed For Specific Reasons, Some Of Which Have Gone Away.

I find that the border of the viewport in paper space, will plot unless it is expanded to outside of the paper itself. Here is another look at the problem: I came accross this previous thread. There seems to be a little issue here on what the proper or best practice is for calling out revisions on the face of the drawing, in the drawing formats.

Yep Because I Do Not Agree With This Practice.

This isn't a big issue, just really curious if there is another way to do this. This stk label was on some older prints that we have. Really they are just nominally illustrating the center plane or axis of a feature. I hope this is the right forumn.

I'd Really Appreciate Any Advice!

Used so that you can still see what. The old copy machines, blue prints and sepia. Acad 2006 thanks paul ostand www.ostand.com Some companies use the term coating or finish as in dimensions apply after coating.